Comau e.DO - Documentation Storage; Limits on the Handbook Contents; Symbols Used in the Handbook

Comau Robotics Product Instruction
PREFACE
8
Documentation storage
All documents supplied with e.DO must be stored in the immediate vicinity of the area
in which e.DO is in use and kept available to all persons operating on the machine.
The documentation must be kept intact for the entire operational life of e.DO.
In case of lost or damage of this manual (also partial), require a new copy to the
manufacturer.
Limits on the handbook contents
The images included in the instructions handbook have the purpose to represent the
product
and can differ from what is actually visible on the system.
Symbols used in the handbook
Below are indicated the symbols that represent: WARNING, CAUTION and NOTES and
their meaning.
This symbol indicates operating procedures, technical information and precautions that
if are not observed and/or correctly performed may cause injuries to the personnel.
This symbol indicates operating procedures, technical information and precautions that
if are not observed and/or correctly performed may cause damage to the equipment.
This symbol indicates operating procedures, technical information and precautions that
must be underlined.
The symbol draws the attention to materials disposal that is regulated by the WEEE
Directive.