14-2 Configuration and Diagnostic Utilities
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Carey Gregg Saved by: Carey Gregg Saved date: 05/05/00 9:49 AM
Part Number: 170706-002 File name: Ch14.doc
1. Turn on or restart the computer. When the blinking cursor
appears upper-right on the screen, press
F10.
n To change the language, press F2.
n To view navigation information, press F1.
n To return to the Computer Setup menu from anywhere
in Computer Setup, press
Esc.
2. Select the File, Security, or Advanced menu.
3. To close Computer Setup and restart the computer
n Select FileàSave Changes and Exit, then press Enter.
or
n Select FileàIgnore Changes and Exit, then press Enter.
4. When you are prompted to confirm your action, press
F10.
Selecting from the File Menu
Selecting from the File Menu
Begin here To do this
System information n View identification information
about the computer, a docking base,
and battery packs.
n View specification information
about the processor, memory
and cache size, and system
ROM.
Save to floppy Save system configuration to a formatted
720K or larger diskette.
Restore from floppy Restore system configuration from a
diskette.
Restore defaults Replace configuration settings in Computer
Setup with factory default settings.
(Identification information is retained.)
Ignore changes and exit Cancel changes entered during the current
Computer Setup session, then exit and
restart the computer.
Save changes and exit Save changes entered during the current
Computer Setup session, then exit and
restart the computer.
To Next Page
Loading...
Need help?
General