7-4 Connecting to a Local Area Network (available on select models)
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Carey Gregg Saved by: Carey Gregg Saved date: 05/05/00 10:58 AM
Part Number: 170706-002 File name: Ch07.doc
Confirming the Network Protocol
(Windows 95 or Windows 98)
To confirm the network protocol setting after reinstalling LAN
drivers:
1. Select Start
àSettingsàControl Panel. Double-click
Network, then select the Configuration tab.
2. Verify that the desired protocols are included on the list of
installed network components.
NOTE: For information about adding a network protocol, refer
to your operating system documentation.
Updating or Reinstalling Modem and LAN Drivers in
Windows NT 4.0
IMPORTANT: To uninstall or reinstall modem or LAN drivers in
Windows NT 4.0, you must log in to Windows NT with
Administrator privileges.
When installing the LAN drivers, it may be necessary to
reinstall Windows NT 4.0 Networking before installing the
LAN drivers.
Uninstalling Modem and LAN Drivers
(Windows NT 4.0)
1. Select StartàSettingsàControl Panel, then double-click
Add/Remove Programs.
2. Select Compaq 56K (V.90) Mini PCI from the list of
programs.
3. Select the Add/Remove button.
4. Select Yes to confirm the removal.
5. When prompted to restart the system, select No.
6. Select OK to close the Add/Remove Programs window.
7. In the Control Panel window, double-click Network, then
select the Adapters tab.
8. Select Intel PRO/100+ Mini PCI, then select Remove.
9. Select Yes to continue.
10. Select Yes to confirm the file removal.
To Next Page
Loading...
Need help?
General