Connecting to a Local Area Network (available on select models) 7-5
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Carey Gregg Saved by: Carey Gregg Saved date: 05/05/00 10:58 AM
Part Number: 170706-002 File name: Ch07.doc
11. Restart the computer.
Reinstalling LAN Drivers and Windows NT Networking
(Windows NT 4.0)
If it has become necessary to reinstall LAN drivers, you may
also need to reinstall Windows NT Networking.
To determine whether you must reinstall Windows NT
Networking, select Start
àSettingsàControl Panel, then
double-click Network.
n If you are prompted to install Windows NT
Networking—Select Yes, then follow the instructions
below for “Reinstalling Windows NT Networking
(Windows NT 4.0).”
n If you are not prompted to install Windows NT
Networking—Go to the instructions later in this section for
“Reinstalling LAN Drivers (Windows NT 4.0).”
Reinstalling Windows NT Networking
(Windows NT 4.0)
1. Select Start
àSettingsàControl Panel, then double-click
Network.
2. At the Windows NT Networking installation prompt, select
Yes.
3. Select Wired to the Network, then select the Next button.
4. Select the Select from List button.
5. Select the Have Disk button.
6. When prompted, type the path to the Intel PRO/100+ Mini
PCI drivers:
C:\Program Files\Compaq\CPQLANModem\Network
7. Select the OK button.
8. Select Intel PRO Adapter.
9. Select the OK button.
10. Select the Next button.
11. Select the network protocol(s) for your LAN environment,
then select the Next button.
To Next Page
Loading...
Need help?
General