Configuration and Diagnostic Utilities 14-5
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Carey Gregg Saved by: Carey Gregg Saved date: 05/05/00 9:49 AM
Part Number: 170706-002 File name: Ch14.doc
Settings to specify how the
computer recognizes multiple,
identical docking base that are
identically equipped or from
reporting the processor serial
number software.
Using Compaq Diagnostics for Windows
n When you access Compaq Diagnostics for Windows, a
scan of all system components appears on the screen
before the Compaq Diagnostics window opens.
n n You can display more or less information from anywhere
within Compaq Diagnostics for Windows by selecting
Level on the menu bar.
n Compaq Diagnostics for Windows are designed to test
Compaq components. If non-Compaq components are
tested, the results may be inconclusive.
Displaying System Information
1. To access Compaq Diagnostics for Windows, select Startà
SettingsàControl PanelàCompaq Diagnostics.
2. Select Categories, then select a category from the
drop-down list.
n To save the information, select FileàSave As.
n To print the information, select FileàPrint.
3. To close Compaq Diagnostics for Windows, select
File
àExit.
Running a Diagnostic Test
1. To access Compaq Diagnostics for Windows, select Startà
SettingsàControl PanelàCompaq Diagnostics.
2. Select the Test tab.
3. In the scroll box, select the category or device you want
to test.
4. Select a test type.
n Quick Test—Runs a quick, general test on each device
in a selected category.
To Next Page
Loading...
Need help?
General