7-6 Connecting to a Local Area Network (available on select models)
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Carey Gregg Saved by: Carey Gregg Saved date: 05/05/00 10:58 AM
Part Number: 170706-002 File name: Ch07.doc
12. Select the network service(s) for your LAN environment.
Select the Next button, then continue to select the Next
button on succeeding screens until you are prompted to
enter a drive designator.
13. When prompted, type the drive designator for your
Windows NT 4.0 operating system. For example, if
Windows NT 4.0 is on your hard drive, type
C: (where C: is
the designator of your hard drive).
14. Select the binding(s) for your LAN environment. Select the
Next button, then continue to select the Next button on
succeeding screens until you are prompted to enter the
computer name and workgroup/domain information.
15. When prompted, enter the computer name and the
workgroup/domain information for your LAN
environment, then select the Next button.
16. Select the Finish button.
17. Restart the computer.
Reinstalling LAN Drivers (Windows NT 4.0)
1. Select Start
àSettingsàControl Panel, then double-click
Network.
2. Select the Adapters tab
àAdd buttonàHave Disk button.
3. When prompted for the path to the Intel PRO/100+ Mini
PCI drivers, type the following, then select OK.
C:\Program Files\Compaq\CPQLANModem\Network
4. Select Intel PRO AdapteràOK.
5. Select the properties for your LAN environment, then
select OK.
6. Restart the computer.
Reinstalling Modem Drivers (Windows NT 4.0)
1. Select StartàRun. In the Open box, type
C:\Program Files\Compaq\CPQLANModem\Modem\NT40\Combo\Setup
2. Select the OK button, then select the Next button on
succeeding screens until the computer copies the modem
drivers.
To Next Page
Loading...
Need help?
General