Connecting to a Local Area Network (available on select models) 7-3
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Carey Gregg Saved by: Carey Gregg Saved date: 05/05/00 10:58 AM
Part Number: 170706-002 File name: Ch07.doc
Reinstalling LAN Drivers (Windows 95 or Windows 98)
When you start the computer after uninstalling modem and
LAN drivers, the computer displays the New Hardware Found
“PCI Ethernet Controller” dialog box.
1. Select the Next button in the dialog box, then continue to
select the Next button on succeeding screens until you are
prompted to enter a driver location.
2. At the driver location prompt, type the path to the Intel
PRO/100+ drivers:
C:\Program Files\Compaq\CPQLANModem\Network
3. Select the Next button, then continue to select the Next
button on succeeding screens until the computer copies the
LAN files.
4. To complete the installation of the LAN files, select Finish.
Reinstalling Modem Drivers
(Windows 95 or Windows 98)
When you start the computer after installing LAN drivers, the
computer displays the New Hardware Found “PCI Serial
Controller” dialog box.
1. Select the Next button in the dialog box, then continue to
select the Next button on succeeding screens until you are
prompted to enter a driver location.
2. At the driver location prompt, type the path to the Compaq
56K (V.90) Mini PCI drivers:
C:\Program Files\Compaq\CPQLANModem\Modem\Win9x
3. Select the Next button, then continue to select the Next
button on succeeding screens until the computer copies the
modem drivers.
4. To continue, select Finish.
5. To use the modem drivers, you must restart the computer.
To Next Page
Loading...
Need help?
General