6-8 Using an Internal Modem (available on select models)
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Carey Gregg Saved by: Carey Gregg Saved date: 05/05/00 12:09 PM
Part Number: 170706-002 File name: Ch06.doc
n Set the modem to ignore dial tones—If the modem
receives a dial tone it does not recognize, it will not dial
and will display a No Dial Tone error message. To set the
modem to ignore all dial tones before dialing:
1. Select Start
àSettingsàControl PanelàModems.
2. Select your modem, then select Properties
àConnections
tab, then clear the Wait for Dial Tone Before Dialing
check box.
To Next Page
Loading...
Need help?
General