EasyManuals Logo

Compaq dc5800 - Microtower PC Reference Guide

Compaq dc5800 - Microtower PC
255 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #194 background imageLoading...
Page #194 background image
Control panel message Description Recommended action
2202-PMM Deallocation Error during MEBx
cleanup
Memory error during POST execution of the
Management Engine (ME) BIOS Extensions
option ROM
1. Reboot the computer.
2. Unplug the power cord, re-seat the
memory modules, and reboot the
computer.
3. If the memory configuration was
recently changed, unplug the power
cord, restore the original memory
configuration, and reboot the computer.
4. If the error persists, replace the system
board.
2203-Setup error during MEBx execution MEBx selection or exit resulted in a setup
failure.
1. Reboot the computer.
2. Unplug the power cord, re-seat the
memory modules, and reboot the
computer.
3. If the memory configuration was
recently changed, unplug the power
cord, restore the original memory
configuration, and reboot the computer.
4. If the error persists, replace the system
board.
2204-Inventory error during MEBx execution BIOS information passed to the MEBx
resulted in a failure.
1. Reboot the computer.
2. If the error persists, update to the latest
BIOS version.
3. If the error still persists, replace the
system board.
2205-Interface error during MEBx execution MEBx operation experienced a hardware
error during communication with ME.
1. Reboot the computer.
2. If the error persists, update to the latest
BIOS version.
3. If the error still persists, replace the
system board.
2211-Memory not configured correctly for
proper MEBx execution.
DIMM1 is not installed. Make sure there is a memory module in the
black DIMM1 socket and that it is properly
seated.
Invalid Electronic Serial Number Electronic serial number is missing. Enter the correct serial number in Computer
Setup.
Network Server Mode Active and No
Keyboard Attached
Keyboard failure while Network Server Mode
enabled.
1. Reconnect keyboard with computer
turned off.
2. Check connector for bent or missing
pins.
3. Ensure that none of the keys are
depressed.
4. Replace keyboard.
Parity Check 2 Parity RAM failure. Run Computer Setup and Diagnostic utilities.
Table C-1 Numeric Codes and Text Messages (continued)
186 Appendix C POST Error Messages

Table of Contents

Other manuals for Compaq dc5800 - Microtower PC

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Compaq dc5800 - Microtower PC and is the answer not in the manual?

Compaq dc5800 - Microtower PC Specifications

General IconGeneral
ProcessorIntel Core 2 Duo, Intel Pentium Dual-Core, Intel Celeron
MemoryUp to 8 GB DDR2 SDRAM
GraphicsIntegrated Intel Graphics Media Accelerator 3100
Optical DriveDVD-ROM, DVD+/-RW
Form FactorMicrotower
Expansion Slots1 PCI, 2 PCIe x1, 1 PCIe x16
AudioIntegrated High Definition Audio
NetworkIntegrated Gigabit Ethernet
PortsVGA, Serial, Parallel, PS/2, Audio in/out
Operating SystemWindows Vista Business, Windows XP Professional
Power Supply300W
USB Ports8 USB 2.0 (2 front, 6 rear)

Related product manuals