Comtech EF Data HPOD - Examples of Multi-Hazard Notices; Recommended Standard Designations; Metric Conversion; Electrical Safety Notice

HPOD C-, X-, and Ku-Band High-Power Outdoor Amplifiers Revision 6
Preface MN/HPOD.IOM
x
A CAUTION
gives information about a possible hazard that MAY CAUSE INJURY
or PROPERTY DAMAGE.
A NOTE
gives important information about a task or the equipment.
A REFERENCE
directs you to additional information about a task or the
equipment.
Examples of Multi-Hazard Notices









Recommended Standard Designations
Recommended Standard(RS) Designationshavebeen supersededbythenew designation ofthe
ElectronicIndustriesAssociation(EIA).ReferencestotheoldRSDesign ation(e.g.,RS‐232)maybe
used when depicting actual text displayed on the unit’s Web Server pages, serial interface, or
physicallabeling.Allotherre f er encesinthemanualus
etheEIAdesignations.
Metric Conversion
Metric conversion information is located on the inside back cover of this manual. This
information is provided to assist the operator in cross‐referencing non‐Metric to Metric
conversions.


Carefully review the following information:
Electrical Safety Notice
Neutral Fusing – Double pole/neutral fusing is used on the prime power supply
input.
Thisequipmenthasbeen designed tominimize exposureofpersonnelto hazards.For further