Comtech EF Data HPOD - Date and Time

HPOD C, X-, or Ku-Band High-Power Outdoor Amplifier Revision 6
Ethernet-based Remote Product Management MN/HPOD.IOM
4–19
4.5.5.3.2 Config | Utility Page
UsethispagetoconfigureHPODoperatingparameters.
















Figure 4-7. Config | Utility page
Atanytime,click[Refresh]toupdatethispageandseethemostrecentdata.
Date and Time
EntertheDateand/ortheTime:

Field Format Minimum Value Maximum Value
Date (MM/DD/YY)
Month 01 12
Day 01 31
Year 00 99
Time (HH:MM:SS)
Hours 00 23
Minutes 00 59
Seconds 00 59

Click[ChangeDate/Time]tosavethesettings.
Circuit ID
EnteraCircuitIDstringofupto48characters.Click[ChangeCID]tosavethestring.
Current SC/13320 Active Firmware Image # (read-only)
ThisexampleidentifiesImage1astheCurrentActiveFirmwareImage.

NextRebootImage–Usethedrop‐downlisttoselecttheNextRebootImageas1or2,and
thenclick[Submit]whendone.