4–1
Chapter 4. ETHERNET-BASED
REMOTE PRODUCT
MANAGEMENT
4.1 Introduction
This chapter describes the functionality of the HPOD Ethernet (HTTP) Interface. Ethernet‐based
RemoteProductManagementoftheHPODisavailableusingtheJ6|COM1port.
To proceed with Ethernet‐based Remote Product Management, assump tions are
madethat:
• TheHPODisoperatingwiththelatestversionfirmwarefiles.
• TheHPODisconnectedtoauser‐suppliedWindows‐basedPCasfollows:
o ThePC’sEthernetportis connected totheHPODJ6|COM1portwit
ha
190‐pintoRJ‐45adaptercable.
o The PC is running a terminal emulation program (for operation of the
HPOD remote control Telnet interface) and a compatible web browser
(foroperationoftheHPODWeb ServerInterface).
• The HPODIPAddress hasbeennotedusingtheHPODre
moteserialorTelnet
‘FRW’queryorbyusingtheHPODWebServerInterfaceAdmin|Accesspage.
See the Remote Commands and Queries specific ations tables found in Chapter 5.
SERIAL‐BA SED REMOTE PRODUC T MANAGEMENT for detailed descri ptions of the
configuration parameters featured on the individual web pages depicted in this
chapter.
To Next Page
Loading...
