UGE048/1103 CSC Combination Puller/Cutter
T
ROUBLESHOOTING 6-3
DANGER: Sharp blades!
Most injuries caused by knife blades occur
when the cutter has been turned off. Handle
blades with care at all times.
● Always wear cut-resistant gloves when the
cutting chamber is open and when handling
blades.
● Always lock out power to the cutter before
opening the cutting chamber.
● Always wait until the cutter head has stopped
completely before opening the knife guard.
Combination puller/cutters are equipped with
several safety devices to ensure safe operation.
Never remove or disable these devices to sus-
tain production. Operating without these
devices can cause severe injury.
● When the knife guard is opened, the knife
guard switch stops the cutter.
● Two proximity-type safety switches prevent
operation unless the cutter bushings are in
place.
● The Stop button activates a circuit that
stops the knife.
AFEW WORDS
OF
CAUTION
To Next Page
Loading...