Conair CSC - Specifications

2-8 DESCRIPTION
UGE048/1299 CSC Combination Puller/Cutter
MODELS 320CSC2 320CSC3 426CSC2 426CSC3 426CSC4
Performance characteristics
Extrudate capacity in. {mm} dia. 2 {51} 3 {76} 2 {51} 3 {76} 4 {102}
Blade drive motor Hp {kW}
CSC cutter 2.7 {2.01} 2.7 {2.01} 2.7 {2.01} 2.7 {2.01} --
High torque motor* 3.8 {2.8} 3.8 {2.8} 3.8 {2.8} 3.8 {2.8} 3.8 {2.8}
Puller drive motor Hp {kW} 1.0 {0.75} 1.0 {0.75} 1.5 {1.1} 1.5 {1.1} 1.5 {1.1}
Optional drive motor Hp {kW} 1.5 {1.1} 1.5 {1.1} 2.0 {1.5} 2.0 {1.5} 2.0 {1.5}
Servo drive motor Hp {kW} 2.46 {1,83} 2.46 {1,83} 2.46 {1,83} 2.46 {1,83} 2.46 {1,83}
Dimensions in. {mm}
A - Height 66.6 {1691} 66.6 {1691} 66.6 {1691} 66.6 {1691} 66.6 {1691}
B - Height to centerline 42±2 {±50.8} 42 {1067} 42 {1067} 42 {1067} 42 {1067} 42 {1067}
C - Width 26 {676} 26 {676} 26 {676} 26 {676} 26 {676}
D - Length 74 {1880} 74 {1880} 74 {1880} 80 {2032} 80 {2032}
Belt width ±3/8 {±9.5} 3 {76} 3 {76} 4 {102} 6 {152} 6 {152}
Belt traction length 20 {508} 20 {508} 26 {660} 26 {660} 26 {660}
Feed opening 4 {102} 4 {102} 5 {127} 5 {127} 5 {127}
Weight lb {kg}
Installed 1200 {545} 1200 {545} 1350 {613} 1350 {613} 1350 {613}
Shipping 1300 {590} 1300 {590} 1450 {658} 1450 {658} 1450 {658}
Electrical requirements Full Load Amps
Drive type(Puller) open closed servo open closed servo open closed servo open closed servo open closed servo
loop loop drive loop loop drive loop loop drive loop loop drive loop loop drive
Loops and Drives, Hp
1.0-1.5 1.0-1.5 2.46 1.0-1.5 1.0-1.5 2.46 1.5-2.0 1.5-2.0 2.46 1.5-2.0 1.5-2.0 2.46 1.5-2.0 1.5-2.0 2.46
230V/1 phase/60Hz {3 phase} 21-25 20-22 33.6 21-25 20-22 33.6 25-25 22-24 33.6 25-25 22-24 33.6 --- --- ---
460V/1 phase/60Hz {3 phase} 11-14 10.5-12 16.8 11-14 10.5-12 16.8 14-14 12-13.5 16.8 14-14 12-13.5 16.8 --- --- ---
230V/Optional 3 Phase/60Hz {3 phase} 22.5-26.5 20.5-22.5 32.3 22.5-22.5 20.5-22.5 32.3 26.5-26.5 22.5-24.5 32.3 26.5-26.5 22.5-24.5 32.3 26.5-26.5 22.5-24.5 32.3
460V/Optional 3 Phase/60Hz {3 phase} 12-15 12-15 16.2 12-15 12-15 16.2 15-15 15-15 16.2 15-15 15-15 16.2 15-15 15-15 16.2
Cutter Control Red Lion Red Lion Red Lion Red Lion Red Lion
Servo Puller Control* Red Lion* Red Lion* Red Lion* Red Lion* Red Lion*
*Optional
D
C
A
B
SPECIFICATIONS
TPEM003/1103