Conair CSC - Page 19

UGE048/1299 CSC Combination Puller/Cutter
D
ESCRIPTION 2-7
MODELS 320CSC2L 320CSC3L 426CSC2L 426CSC3L 426CSC4L
Performance characteristics
Extrudate capacity in. {mm} dia. 1.25 {318} 2.25 {572} 1.25 {318} 2.25 {572} 3.25 {823}
Blade drive motor Hp {kW}
CSC cutter 2.7 {2.01} 2.7 {2.01} 2.7 {2.01} 2.7 {2.01} 2.7 {2.01}
Puller drive motor Hp {kW} 1.0 {0.75} 1.0 {0.75} 1.5 {1.1} 1.5 {1.1} 1.5 {1.1}
Optional drive motor Hp {kW} 1.5 {1.1} 1.5 {1.1} 2.0 {1.5} 2.0 {1.5} 2.0 {1.5}
Optional Servo drive motor Hp {kW} 2.46 {1.83} 2.46 {1.83} 2.46 {1.83} 2.46 {1.83} 2.46 {1.83}
Dimensions in. {mm}
A - Height 66.6 {1691} 66.6 {1691} 66.6 {1691} 66.6 {1691} 66.6 {1691}
B - Height to centerline 42±2 {±50.8} 42 {1067} 42 {1067} 42 {1067} 42 {1067} 42 {1067}
C - Width 26 {676} 26 {676} 26 {676} 26 {676} 26 {676}
D - Length 74 {1880} 74 {1880} 74 {1880} 80 {2032} 80 {2032}
Belt width ±3/8 {±9.5} 3 {76} 3 {76} 4 {102} 6 {152} 6 {152}
Belt traction length 20 {508} 20 {508} 26 {660} 26 {660} 26 {660}
Feed opening 4 {102} 4 {102} 5 {127} 5 {127} 5 {127}
Weight lb {kg}
Installed 1200 {545} 1200 {545} 1350 {613} 1350 {613} 1350 {613}
Shipping 1300 {590} 1300 {590} 1450 {658} 1450 {658} 1450 {658}
Electrical requirements Full Load Amps
Drive type(Puller) Open Loop Closed Loop Servo Open Loop Closed Loop Servo
1.0 Hp 1.5 Hp 1.0 Hp 1.5 Hp 2.46 Hp 1.5 Hp 2.0 Hp 1.5 Hp 2.0 Hp 2.46 Hp
230V/1 phase/60Hz {3 phase} 21 25.0 19.7 22 33.6 25 25 22 22 32.3
460V/1 phase/60Hz {3 phase} 11.0 14.0 10.5 12 16.8 14 14 12 12 16.2
Cutter Control Red Lion Red Lion Red Lion Red Lion Red Lion
Servo Cutter Control* Red Lion* Red Lion* Red Lion* Red Lion* Red Lion*
* Optional
D
A
B
SPECIFICATIONS
C
TPEM003/1103