Conair CSC - MAINTENANCE; Maintenance Features; Warnings and Cautions; Preventative Maintenance Schedule

5-1
UGE048/1103 CSC Combination Puller/Cutter
●●
Maintenance Features . . . . . . . .5-2
●●
Warnings and Cautions . . . . . . .5-2
●●
Preventative Maintenance
Schedule . . . . . . . . . . . . . . . . .5-4
●●
Inspecting Cutter Blades . . . . . .5-6
●●
Inspecting Blade Hardware . . . .5-6
●●
Inspecting Cutter
Bushing Screws . . . . . . . . . . .5-7
●●
Checking the Closure Latch . . .5-7
●●
Checking Floor Locks . . . . . . . .5-7
●●
Cleaning the Lubrication Tray . .5-8
●●
Lubricating the Slide Rail . . . . .5-8
●●
Checking the
Grease Locations . . . . . . . . . .5-9
●●
Adjusting the Cutter
Proximity Switches . . . . . . . .5-10
●●
Checking Electrical
Connections . . . . . . . . . . . . .5-11
●●
Testing Belt Tension . . . . . . . .5-13
●●
Checking the Belt Gap . . . . . . .5-15
●●
Replacing Belts . . . . . . . . . . . .5-18
●●
Checking Torque . . . . . . . . . . .5-20
MAINTENANCE