Conair CSC - OPERATION; The Cutter Control; Cutter Operation Instructions; Cutter Control Features

4-1
UGE048/1103 CSC Combination Puller/Cutter
●●
The Cutter Control . . . . . . . . . . . .4-2
●●
Cutter Operation Instructions . . .4-3
●●
Cutter Control Features . . . . . . . .4-4
●●
Puller Control Features . . . . . . .4-27
●●
Stopping the Puller . . . . . . . . . . .4-28
●●
Shutting down the Puller . . . . . .4-28
●●
Combination Control features . .4-28
●●
Before Starting the Combination
Unit . . . . . . . . . . . . . . . . . . . . .4-29
●●
Powering Up . . . . . . . . . . . . . . . .4-30
●●
Programing the Puller Speed . . .4-30
●●
Setting the Cutting Mode . . . . . .4-31
●●
Setting the Scale Factor . . . . . . .4-32
●●
Checking Cut Quality . . . . . . . . .4-32
●●
Starting the Puller/Cutter . . . . . .4-33
●●
Making Adjustments
During Operation . . . . . . . . . .4-36
●●
Making Large Changes
to the Puller Speed . . . . . . . . .4-37
●●
Stopping Only the Cutter . . . . . .4-37
●●
Stopping the Puller/Cutter . . . . .4-38
●●
Shutting down the Combinations
Unit . . . . . . . . . . . . . . . . . . . .4-38
OPERATION