UGE048/1103 CSC Combination Puller/Cutter
M
AINTENANCE 5-7
Check the latch and adjust it so the knife guard closes com-
pletely. This prevents false triggering of the safety switch.
I
NSPECTING
CUTTER
BUSHING
SCREWS
Check the set screws that secure the cutter bushings. If bush-
ings move during cutting, cutting blades, and possibly the
drive chain, could be damaged.
CHECKING THE
C
LOSURE
LATCH
It is best to remove the weight from the casters for optimum
stability during cutting cycles. Check to see if the floor lock-
ing mechanism is properly adjusted.
CHECKING
FLOOR LOCKS
To Next Page
Loading...