Conair CSC - Checking Grease Locations; Grease Locations

UGE048/1103 CSC Combination Puller/Cutter
M
AINTENANCE 5-9
Lubricate all shafts and grease fittings as needed.
Use regular grease for all
locations except thread rods,
vertical shafts, and vertical
shaft drive boxes.
For thread rods and vertical
shafts, use Never-Seize or
equivalent.
The vertical shaft drive boxes
require a high-temperature
grease. Use Mobilgrease 28
or equivalent.
C
HECKING
G
REASE
LOCATIONS
Lower bearing
grease fitting