The Conair Combination Puller/Cutter comes fully assembled
in a single crate.
UNPACKING THE
BOXES
CSC Combination Puller/Cutter UGE048/1103
3-2 INSTALLATION
CAUTION: Lifting
To avoid personal injury or damage to the cut-
ter, lift the cutter using a forklift or hoist with
straps that have been positioned at the cutter's
center of gravity.
Carefully uncrate the cutter and its compo-
nents.
Remove all packing material,
protective paper,
tape, and plastic. Compare contents to the shipping papers
to ensure that you have all the parts.
Carefully inspect all components to make sure no
damage occurred during shipping. Check all wire terminal
connections, bolts, and any other electrical connections,
which may have come loose during shipping.
Record serial numbers and specifications in
the blanks provided on the back of the User Guide's title
page. This information will be helpful if you ever need
service or parts.
You are now ready to begin installation.
See Preparing for Installation, Section 3.
1
2
3
4
5
To Next Page
Loading...