CONFIGURATION
2
After green LED starts to blink it is possible to restore initial settings of the router
by pressing button RST on front panel. If press button RST, configuration is restored to default
and it is reboot (green LED will be on).
1.1. Secured access to web configuration
To the web configuration can be accessed via a secure HTTPS protocol.
In the event of a default router IP address is a secure router configuration accessed
by typing address https://192.168.1.1 in the web browser. The first approach is the need
to install a security certificate. If your browser reports a disagreement in the domain, this
message can be prevented use the following procedure.
Since the domain name in the certificate is given the MAC address of the router (such
separators are used dashes instead of colons), it is necessary to access the router under this
domain name. For access to the router via a domain name, it is adding a DNS record in the
DNS table, the operating system.
• Editing /etc/hosts (Linux/Unix)
• Editing C:\WINDOWS\system32\drivers\etc\hosts (Windows XP)
• Configuring your own DNS server
In addition to configuring the router with MAC address 00:11:22:33:44:55 is accessed
to secure configuration by typing address https://00-11-22-33-44-55 in the web browser. The
first approach is the need to install a security certificate.
When using self signing certificate must upload your files and http_cert http_key
directory /etc/certs in the router.
To Next Page
Loading...
