Data Management
56 Operator’s Manual
COM port USB Driver Alternatives
• Load the appropriate driver from the product CD into the connected computer.
• Contact Technical Services or a local Covidien representative.
Note:
The following graphics are representative of the screens users may encounter while
installing a USB driver from the compact disc. Individual operating system languages
may vary.
To install a USB driver from the compact disc
1. Insert the Nellcor™ Bedside SpO2 Patient Monitoring System compact disc (CD)
into the designated personal computer (PC).
2. Copy the COVIDIEN USB to UART Bridge Driver zip file to the PC, installing it in
the desired program folder.
3. Right-click on the zipped folder.
4. Select EXTRACT ALL.
5. Open the extracted folder.
6. Launch the Driver Installer executable.
Note:
To change the location of the driver, select the desired mapping by clicking
CHANGE INSTALL LOCATION.
7. Click INSTALL.
To Next Page
Loading...
