192 • Crestron Pyng OS 2 for CP4-R Product Manual – DOC. 8432A
Volume
Tap Volume from the Hardware menu to display the Volume Settings screen.
Settings Screen - Volume Settings
Use the Volume Settings to configure volume settings for the touch screen and for the
2N door station intercom (if configured).
• Master Volume
o Tap the up and down arrow buttons to raise or lower the master volume
incrementally.
o Tap Mute On to mute the master volume.
o Tap Play Test to play a test recording at the current master volume level.
o Tap Mute Off to unmute the master volume.
• Media Volume
o Tap the up and down arrow buttons to raise or lower the media volume
incrementally.
o Tap Mute On to mute the media volume.
o Tap Mute Off to unmute the media volume.
To Next Page
Loading...
