Product Manual – DOC. 8432A Crestron Pyng OS 2 for CP4-R • 23
To associate a paired wired device with a room:
1. Select the room where the device is installed from the Select a room menu. Refer
to the image on pg. 21.
2. Select the device from the wired connection menu.
Pair Devices Screen - Ethernet and Wi-Fi
3. Tap the plus button (+) to add the device to the room selected in step 1.
NOTE: Tap the location button to turn on the location feature for the device
(if supported), which is used to locate the device in the room.
4. Enter a descriptive name for the device in the text field that is displayed.
5. For DM NVX devices, select whether the device will be configured as a receiver
(audio input or output) or as a transmitter (audio input or output).
6. Tap OK. The device is added to the room.
To Next Page
Loading...
Need help?
General
