CoCo-80 User Manual
118
To deactivate the schedule, press F6 Exit button in the signal display screen.
Recall Signals
Signals that are the result of a current measurement are named “live” signals.
Occasionally it is helpful to compare live signals with previously saved signals and
stored on the CoCo device. This can be done with the recall feature. Recalled
signals can be overlaid with live signals for comparison or displayed in a separate
window. Signals can also be un-recalled which removed them from all displays
but does not affect the data saved on the CoCo.
To recall the signals that you just saved, press the Recall hard button.
To recall a signal that you previously saved, press the File Button, then press the
F1 Files Button then press the F5 Review Button, Next use the up and down
arrow buttons to highlight a signal to be recalled and press the. F3 Recall Button.
Next highlight a signal from the Record Files list and then press the F3 Recall
Button.
To Next Page
Loading...