CoCo-80 User Manual
25
Navigation indicates the name of the
screen or provides information about the analysis such as sampling
rate.
Volume indicates the volume level for the internal speaker.
Power indicates battery or line power.
Battery status indicates the state of charge.
Indicates whether a connection between the CoCo and a
computer exists. A green check, as show, indicates a physical
connection, a red x indicates connection problems.
System time displays the time (defined in the Setup screen).
Other statuses, such as sampling rate, number of averaged frames in spectral
processing, and number of frames acquired will be displayed according to the
running CSA.
Welcome Screen
The Welcome Screen is shown after the system has completed the startup
sequence. It shows the 4 most recent CSA projects at the top and other functions
at the bottom. It can be used to verify the date and time, network connection
settings, select a CSA project, and run the project.
Figure 22: Welcome screen is shown on startup.
Analysis Button
The Analysis Button brings up the Configurable Signal Analysis (CSA) groups.
To Next Page
Loading...