CoCo-80 User Manual
79
Figure 99. CoCo Update Page
When new CSA projects are downloaded, if the new CSA files take the same file
name as the old ones, the old CSA files will be renamed to the CSA files with
sequence number added. This approach will prevent overwriting the old CSA files
that may have been changed by the user.
If the connection to the Internet could not be established, please press the Setup
button and click on the Connections icon. This will lead you to the Ethernet
network setup. The most common problem is caused by inappropriate IP address
setting. Most often, your LAN requires you set up the IP as “Dynamically obtain
an IP via DHCP”. Please refer to section “Configuring the CoCo-80 Network
Settings” in this manual for more details.
CSA — Configurable Signal Analysis
This section describes the Configurable Signal Analysis concept that is the basis
for the CoCo-80 functionality and allows advanced users to customize the analysis
features to suit individual needs. This section gives a brief description that is
intended for the basic user. It does not describe writing projects for advanced
users. For more on writing CoCo-80 analysis functions refer to the manual about
CSA Editor that comes with EDM host software.
When the CoCo-80 powers up the Welcome screen is shown. From this screen
the use must select one of the CSA projects loaded on the CoCo-80. When a CSA
project is selected, the project defines the settings and analysis functions that are
computed by the CoCo-80. These settings include the following:
1. Parameters used by the data conditioning functions such as Add,
Subtract, Multiply, Divide, Square, Square Root, RMS, Scale, Offset,
Decimate
To Next Page
Loading...
