CoCo-80 User Manual
128
2. Execute the EDM software on the PC.
3. Download the data files from the CoCo-80 to PC using EDM software.
The data files will be automatically stored in the ASAM-ODS format. They can be
converted into other formats with the EDM software.
Configuring the CoCo-80 Network Settings
CoCo-80 Network Settings must be configured when an Ethernet or SD Wireless
card are used for communicating with the host. When USB is used for the
connection, this section can be ignored.
To configure the network settings for the CoCo-80, complete the following steps:
1. Power on the CoCo-80. In the Welcome page, move the focus to
Connections and press ENTER.
2. In the IP Settings window click Edit the IP settings to specify a
static IP address and subnet mask. Type in the IP address and
Subnet mask. You must specify a static IP address and use a
crossover cable to directly connect the CoCo-80 to the host computer.
In this case, both the Gateway and DNS server fields must be blank or
set to zeroes. If the network uses a DHCP server and you are not
directly connecting the CoCo-80 to the host computer with a crossover
cable, click the Obtain IP address via DHCP server option
button.
3. Click OK to apply the changes.
Figure 139. Ethernet connection status.
To Next Page
Loading...
