CoCo-80 User Manual
27
Save As… saves the current CSA project with a different name. This can be used
to change project parameters and save the new project without overwriting the
original project.
Delete removes the CSA project from the CoCo-80 flash memory. The CSA
project can be reloaded from the PC if it is accidentally deleted.
Move to lets you move the CSA project file to another group.
Cancel returns to the previous screen
Run loads the selected project and starts the display. The Enter button also loads
and starts the selected project.
Display Button
The Display Button brings up the main Signal Display Window. Pressing the
Display button and Enter will always lead to displaying the current active window.
This is the most frequently used window in this instrument.
Figure 25: Display screen showing a window with one trace.
A signal display window can have either one or two traces. The software allows
three types of signal display windows: A window with one trace; a window with
top and bottom traces, a window with a 3D waterfall trace. Some CSAs also have
other displays available, such as bar graphs and color spectrographs. The picture
below shows a window with two traces.
To Next Page
Loading...
