CoCo-80 User Manual
70
Reset the system by Pushing the Reset Pin
The system can also be reset using the recessed Reset button inserting a pin or
paper clip through the reset hole. The Reset pin hole is shown below.
Figure 95: CoCo side panel where the Reset button is located
CoCo-80 Software Disaster Recovery through EDM
In the event that the CoCo-80 application software programs are completely
corrupted due to an unknown reason, EDM can be used to restore the CoCo-80
back to its original state when via USB.
To perform a full recovery open Global Settings through the CoCo menu and
select CoCo Recovery. Follow the instructions there to complete the restore
process.
Important: This method should be used as a last resort.
All custom CSA’s and any data stored on the CoCo will be
lost.
Keypad Lock
To avoid unintentional operations the keypad can be locked by pressing the
Power button and selecting Lock Keypad from the menu.
Figure 96. Select to Lock Keypad
To Next Page
Loading...
