CoCo-80 User Manual
137
CSA Editor Operation for Spectral Analysis
This section describes the operation of CSA Editor related to FFT based spectral
analysis. For general operation of CSA Editor, refer to the CSA User’s Manual.
CSA Editor Wizard
To start the CSA Editor, click on the CSA Editor icon in the upper-right corner in
EDM. The CSA Editor Wizard dialog box will be displayed.
First, select the number of channels for the project based on the CoCo device it
will run on.
In the next screen, select the application template for the CSA project. Different
templates have different functions available for signal processing. For FFT
spectrum analysis, select Linear Spectrum, Auto Spectrum or Frequency
Response. The software will open the CSA Application Group associated with the
template that you choose.
To Next Page
Loading...