CoCo-80 User Manual
51
Figure 63: Nyquist Plot
While viewing this plot, pressing F5 will add a cursor as a small green ‘+’. Press
the Left and Right arrow keys to move the cursor. The current frequency, real
and imaginary values, and the magnitude and phase are shown on the right.
Setup Button
The Setup button changes the screen to the Main Setup screen. Main setup
includes both measurement settings and system settings. Use the arrow buttons
to select one of the setting icons and press the Enter button to select it. Some
systems settings are under the Other. The system settings are described below.
Figure 64: Main Setup Page
CSA Application Group is the equivalent to pressing Analysis button.
Self Test allows running a self test for the hardware without using external
meter. A built-in precision signal source is used to check whether the input
To Next Page
Loading...
