Crystal Instruments Coco-80 - CoCo-80 On-Line Software Updates

CoCo-80 User Manual
83
CSA Group
CSAs used for 4-
channel CoCo-80
CSAs used for 8-
channel CoCo-80
Description
time and frequency weighting
according to IEC 61672-2002.
SLM RPM(4).csa
SLM RPM(8).csa
Sound Level Meter (SLM)
template provides various
overall sound level readings,
time and frequency weighting
according to IEC 61672-2002.
Order
Tracking
ORDTRK(4).csa
ORDTRK(8).csa
Normalized Order Spectra and
Order Tracks
ORDTRK(4)_CFS.cs
a
ORDTRK(8)_CFS.cs
a
Constant Frequency Bands
ORDTRK(4)_Phase.
csa
ORDTRK(8)_Phase.
csa
Order Tracks with Phase
LimitTest
TimeLimiting(4).csa
TimeLimiting(8).csa
Apply limit test to the time
stream signal of each channel.
Limits are edited in CSA Editor.
APSLimiting(4).csa
APSLimiting(8).csa
Apply limit test to the auto
power spectrum of each
channel. Limits are edited in
CSA Editor.
Transient_Limit(4).
csa
Transient_Limit(8).c
sa
Apply the limit test to transient
captured signals. Limits are
edited in CSA Editor.
My CSA
Histogram(4).csa
Histogram(8).csa
View Histogram and statistical
analysis of each channel.
Table 3. Preprogrammed CSA project Descriptions. Yellow-highlighted
are most often used
When a CSA project is running you can choose to display, record or save data
streams or signals.
Change CSA projects from the CoCo-80
A CSA project specifies the analysis settings and functions including: analysis
parameters and functions, time stream recording, block data save and trace
settings. After a CSA is selected it can be modified from the CoCo-80 to change
these parameters using the Traces and Param soft buttons in the Display screen.
The modified CSA can then be saved using the Save As soft button in the Analysis
screen. This allows modified CSAs to be saved and used again later.
Editing CSA from the EDM Software
CSA files can also be edited or new CSA files can be created from scratch from the
EDM software on a PC. This feature allows the advanced end user to create
custom analysis functions to suit their special needs. This advanced topic is not
covered in this manual. Refer to the CI Support web page for documentation
about editing CSA from the EDM software.