Crystal Instruments Coco-80 - Input Channel Table Settings

CoCo-80 User Manual
36
Figure 37: Input channel status display
Figure 38: Input channel setup table
Select F1 (Edit Table) to bring up the Input Channel Table. This is used to
set the sensitivity, input mode, and label for the hardware input channels. To edit
these parameters use the Arrow buttons to select the parameter and press
Enter. Input channel settings are global settings that apply any loaded CSA.
Input Channel Table Settings
Sensitivity is used to set the physical quantity, units, and sensitivity of the input
channel. Use the arrow buttons to select the parameter and press Enter to select
it. The parameters can be applied to all channels using the soft button Apply to
all Ch.