CoCo-80 User Manual
32
Signal Display Soft Buttons
Traces (F1)
Pressing F1 (Traces) opens the Window and Trace Menu. This menu lists
the names of the existing windows in the display and is used to change the
windows and signals in the display. The menu lists the defined windows at the
top of the menu. The display can be changed from one window to another by
selecting a different window from the menu and pressing Enter. Multiple
windows can be created to provide a flexible display format.
Figure 31. Window and Trace Menu.
Selecting Trace and Window Settings opens the Trace and Window Setting
screen. This screen is used to add new windows and define which signals will be
included in each trace.
After selecting Trace and Window Setting, a new window can be created by
pressing F1 (Add Window). Choose from a single 2D trace, two 2D traces, one
3D waterfall trace, or one color spectrogram.
Figure 32: Options for types of new windows
After selecting the window type, signals need to be enabled to be displayed in this
window. To select a signal press the Enter button to check it. Only signals that
To Next Page
Loading...
