CoCo-80 User Manual
145
The headphone jack is located at the second to the left with a headphone symbol.
Voice annotations and measured input audio can be played back through the
headphones.
The external microphone must be ordered from CI. It is designed so that when
the microphone button is pushed, the voice annotation recording is activated. The
microphone jack connector is on the left side of the peripheral panel. Do not use
any microphone other than the specified CI microphone because without the
microphone button hardware, you will not be able to start a voice annotation
recording.
Figure 145 Microphone with push button (part # CoCo-A12)
Audio Functions
The audio functions are controlled through the CoCo, Setup/Other/Audio screen.
To Next Page
Loading...
