Crystal Instruments Coco-80 - Network Connection Diagnosis

CoCo-80 User Manual
131
AmbiCom WL11 or WL54-SDIO Wireless LAN Card is a compact size wireless
card for the SDIO capable PDAs and other SDIO compatible mobile computing
device using Microsoft Windows Mobile 2003 and Windows Mobile 5.0 operating
system. In addition to the slim and ultra lightweight SD design, the Wireless SD
Card also features secure data transfer and full privacy, exceptional range and
data rate, and meets Wi-Fi certification standards for total interoperability with
other 802.11b/g equipment. More information is available at
http://www.ambicom.com/products/wave2net/wl54-sdio10.html
Network Connection Diagnosis
The following section describes methods for diagnosing network connectivity
from the CoCo-80 or the PC which may be helpful when setting up the network
connection.
Diagnosis from the CoCo-80 side
A tool is provided to detect the existing network settings from the CoCo-80 side.
Push the Setup button, and select the Connections icon and press the Enter
button, the connection status is shown below:
Figure 142. Ethernet connection status screen.
The network setting detection shows the following status:
Hardware: indicates whether the Ethernet, USB port or Wireless card inside the
CoCo-80 device are functional.
IP Address: indicates the IP address of the CoCo-80.
DHCP server: indicate whether the CoCo-80 has detected a DHCP server on the
local area network.