CoCo-80 User Manual
148
The F3 Play button allows you to hear the previously recorded voice annotation.
Then you can use the F1 Previous Annotation or F2 Next Annotation Buttons to
play all the annotations. If the Voice button is not shown, it means the signal file
saved has no voice annotation attached.
Voice annotations will be listed under each recorded or saved signal files and can
be played back with EDM PC software.
Playback the recorded signals from output channel
The CoCo can playback any of the recorded signals from its output channel. To do
so, open a recorded file and press F5 the Playback button.
To Next Page
Loading...