CoCo-80 User Manual
61
3. Calibrate the output offset (0.1 V Range)
4. Calibrate the output gain error (10 V Range)
5. Calibrate the output gain error (0.1 V Range)
6. Calibrate all the input channels automatically
7. Validate calibration offset result
8. Validate calibration gain result
9. Meter Information
10. Calibration Report
F5 (Other) -> Audio allows changing the audio feedback settings including
keypad, power button and alarm sounds. The speaker volume and microphone
level can also be changed. Voice annotation is controlled through Audio setup as
well.
Figure 83. Audio Settings including Voice Annotation.
Among these settings, the Use microphone to record the voice annotation
and Use headphone to listen to any input channel are advanced audio
functions, which must be purchased as a software option.
F6 (VDC) switches to the Vibration Data Collector (VDC) mode. This is a
software option that must be installed on the CoCo.
File Button
The File button displays a list of all the data files saved and recorded to the CoCo
memory. The files are listed with their creation time and total size. The overall
capacity, used space, and free space are shown at the top of the window.
Use the Up and Down arrow keys to scroll through the list. The Left and Right
arrow keys will move between pages. One or multiple files can be selected by
To Next Page
Loading...
