CoCo-80 User Manual
129
Figure 140. Specify a static IP address for the Ethernet connection.
Figure 141. USB Connection Status Display.
Access Code: This is a special setup to prevent an unauthorized user from
accessing the CoCo-80 on the LAN. It also provides a means for the EDM
software to access a particular CoCo-80 on the network. The EDM requires the
CoCo-80 Access Code to access it over the LAN.
Configuring the Host PC Network Settings
If the host system is a PC which is only connected directly to the CoCo-80 using a
cross over Ethernet cable, you can manually configure the TCP/IP settings. You
can also use the “alternate configuration” functionality to maintain seamless
operations on both office and private networks without having to manually
reconfigure the TCP/IP settings. Choose whichever method best applies to your
system configuration and connectivity needs. Refer to the Microsoft support
website for more information on “alternate configuration”
http://support.microsoft.com/kb/283676.
To Next Page
Loading...
