CoCo-80 User Manual
22
Start or stop the time domain data recording designated by
the CSA project
Save the signals that are designated by the CSA project
Open the input channel setup page to configure the sensors
or input channels
Recall or review the last saved signals
Switch to the next display trace
Open the View mode menu to set up the view mode for the
active trace
Turn trigger on or off. When trigger is OFF, it runs in “free
run” mode.
This button will lead the system to a user previously set CSA
and execute it.
Context dependent function soft buttons
Table 1: CoCo buttons and common functions
Startup
Press the Power button to power on the unit. The initialization screen shows the
startup progress. When the startup sequence is complete the Welcome Screen is
shown.
Power off
To power off the unit, press the Power button and then select Turn Off and
press OK. The Cancel soft button returns to the previous menu without powering
off the unit. Lock keypad function can be selected instead of Power Off. Stand by
LAN function will turn off the LED display but keep CoCo running.
Arrow Buttons
The arrow buttons are used to move the focus from one field to another on the
display. By moving the focus you can select different fields to enter parameters,
select other screens, and enter text. They are also used to zoom in and pan
To Next Page
Loading...
