CoCo-80 User Manual
30
Highlight the Y Label area
then press the Enter button.
CoCo will show Change
Signals in Trace window
Highlight the center plot
display area then press
Enter. CoCo will change to
ZOOM mode for 5 seconds.
Use four Arrow buttons to
scale the window.
Highlight the X label area
then press the Enter button.
CoCo will change to X
scaling mode for a 5
seconds. Use four Arrow
buttons to scale the X axis.
Highlight the Y display unit
then press Enter. CoCo will
display the available view
modes. Highlight one using
the Arrow keys, then press
Enter to select it.
Highlight the Y grid area
then press Enter. CoCo will
change to Y scaling mode
for 5 seconds. Use the four
Arrow buttons to scale the
Y axis.
Table 2: Trace viewing functions
Pressing Display again while viewing a live signal window will bring up a menu
to access to several trace functions.
To Next Page
Loading...
