CoCo-80 User Manual
54
Figure 69: File browsing of the SD card
Power indicates the status of the power including the Remaining Capacity of
the battery. The Advanced soft button configures the power settings to optimize
the battery life for specific conditions including Automatic Mode which
maximizes the battery life by automatically turning off the LCD and the backlight
and Ethernet. Maximum Active Mode keeps all components on but uses the
maximum power consumption. The Reset Value resets the total time on battery.
Figure 70. Power Status Screen.
Change Password is used to change the VDC password (if available), to modify
the access control password, and to modify the access control. See CoCo VDC
manual for more information of changing the VDC password. When access
control is enabled, the access password is required to use certain functions. This is
to protect the privacy of measurement.
To Next Page
Loading...
