CoCo-80 User Manual
67
Figure 90: VDC Analysis Input Channel Sensor Setup
Sensitivity is defined in millivolts per engineering unit. The Engineering
Unit is dependent on the Measurement Quantity selected. This selection
opens a numeric keypad to enter the sensitivity value. Press F6 (OK) to accept
the value.
Figure 91: Input Channel & Sensor Setup, adjusting sensitivity in CoCo
When the Physical Quantity is set to Acceleration, a built-in integration or double-
integration module can be applied to generate readings in velocity or
displacement, respectively. When the Physical Quantity is selected as Velocity,
Integration to Displacement and Differentiate to Acceleration are
available. Notice that the algorithms for integration are implemented in the digital
domain. They also included a high-pass filter and DC removal routines.
To Next Page
Loading...
