CS Instruments LD 500 - Modbus Scale Adjustment; Scale Description Field Functionality

Sensor Type Modbus
LD500 V2.03 Seite 58 von 67
External sensor ➔ Settings ➔ Sensor settings ➔ C1 ➔ Scale- description field
External sensor ➔ Settings ➔ Sensor settings ➔ C1 ➔ OK
The use of this factor allows adapting the
output value by the same.
By default or value = 0 no scaling is applied
and displayed in the field is don’t scale
By pressing the OK button, the inputs are
confirmed and stored.