CS Instruments LD 500 - Data Logger Recording Management; Force New Record File Creation; Timed Start for Recording

Datalogger
LD500 V2.03 Seite 60 von 67
External sensor ➔ Settings ➔ Logger settings ➔ force new Record File button
or
External sensor ➔ Settings ➔ Logger settings ➔ force new Record File button ➔ Comment
description field
Main menu ➔ Settings ➔ Logger settings ➔ timed Start button
A new recording file will be created by
pushing the force new record file button
and a name or comment can be entered
by the choice of the Comment
description field.
Important:
If a new recording file should be
created, the force new record file button
must be activated.
Otherwise, the last applied recording
file is used.
By pushing the timed Start button and
then the date/time description field
below, the date and the start time can
be set for a data logger recording.
Remark:
If the start time is activated, it will
automatically be set at the current time
plus a minute.