Datalogger
LD500 V2.03 Seite 61 von 67
External senor ➔ Settings ➔ Logger settings ➔ timed Stop button
External senor ➔ Settings ➔ Logger settings ➔ timed Start button/timed Stop button
➔ Date/Time description field
By pushing the timed Stop button and
then the date/time description field
below, the date and the stop time can
be set for a data logger recording.
Remark:
If the stop time activated, it will
automatically be set to the current time
plus an hour.
After pushing the date/time description
field a window will appear where the
yellow marked area of the time or date
can always be set and changed.