EasyManua.ls Logo

Cupra BORN 2024 - Page 144

Cupra BORN 2024
370 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
142
Air conditioning
The air conditioning does not work or
the CO
2
concentration cannot be measured
The control lamp lights up in yellow.
The following message may be displayed on
the instrument cluster display: The air condi-
tioning is not working properly. Go to the
workshop.
Have the system checked by a specialised
workshop.
The cooling system cannot be switched
on or its operation is limited
The cooling mode operates when the driv-
er's seat is occupied.
Switch on the fan.
Check the air conditioning’s fuse
›››page297.
Change the active combined lter
›››page329.
If the fault continues, consult a specialised
workshop.
Change the temperature unit (Climatronic)
The temperature display can be changed from
Celsius to Fahrenheit on the Infotainment Sys-
tem display using the function button > Set-
tings > Units.
Water or water vapour under the vehicle
If the humidity and temperature outside the
vehicle are high, condensation can drip o
the evaporator in the cooling system and form
a pool underneath the vehicle. This is normal
and does not indicate a leak!
When the outside humidity is high and the am-
bient temperature is low, condensation water
may evaporate when the stationary air condi-
tioning is operating. In this case, steam may
come out from under the vehicle. This does
not mean that the vehicle has any damage.
Stationary air condition-
ing
Introduction
With the stationary air conditioning you can
cool, ventilate and heat the vehicle interior
while the vehicle is parked. In winter, you can
also demist the windscreen and leave it free of
ice and snow (if the layer is thin).
The stationary air conditioning is powered
through a socket or the vehicle’s high voltage
battery. The stationary air conditioning can
be programmed and controlled in the infotain-
ment system and by using the My CUPRA App,
thanks to the CUPRA CONNECT Gen4 tech-
nology.
You can
nd information about the app, its
availability and the necessary requirements for
its use, as well as compatible terminals, on the
Internet ›››page236.
NOTICE
Never place food, medicines or other tem-
perature-sensitive objects close to the air
vents. Food, medicines and other objects
sensitive to heat or cold may be damaged or
made unsuitable for use by the air coming
from the vents.
Note
Using the stationary air conditioning with-
out connecting the charging cable reduces
the vehicle’s range. At extreme exterior tem-
peratures, the heating or cooling power of
the stationary air conditioning may be insuf-
cient to reach the desired temperature.
Managing the stationary air condi-
tioning
The stationary air conditioning only works if
the high voltage battery is suiciently charged.
The stationary air conditioning can be used
without the charging connector being plugged
in. When the charging connector is not plug-
ged in, the stationary air conditioning receives
the necessary electrical power from the high-
voltage battery.

Table of Contents

Related product manuals