EasyManua.ls Logo

Currie tech IZIP - Handlebar Power Buttons; Two-Position Power Switches; Key Lock Power Switches

Default Icon
123 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46

Some2010RMBandTMMmodelsfeatureahandlebar-mounted
power button, either on the control box or as a separate two-
button control next to the throttle.
OnTMMbicyclesthishandlebarbuttonisthesolemeansof
turning the electrical system on and off; there is no other power
switch.
RMBbicycleswithhandlebar-mountedpowerbuttonsusea
two-position battery selector switch as described in the following
section, in addition to the handlebar-mounted controls.
KeyLockPowerSwitch
HandlebarPowerButton
(RMB&RTMB2010)
TwoPositionPowerSwitch
ControlBoxPowerButton
(TMM)

Certainmodels(ex.HG1000,Tricruiser)areequippedwithakey
lock power switch. This feature provides added security allowing
only the person with the key to turn the power on or off. This key
lock switch has the same function as a standard power switch.
ControlBoxPowerButton
(RMB)

RMBbicycleswithhandlebarmountedpowerbuttonsusea
two-positionON/ONswitch,locatedbehindtherearreectoron
the backside of the rack. The left or right switch position selects
a corresponding battery, and does not need to be changed again
unless a different battery source is desired.

Table of Contents

Other manuals for Currie tech IZIP

Related product manuals