Currie tech IZIP - Accessories; Fenders; Front Fender

80



The front fender is mounted at the fork crown. To install the
fender,firstremovethefrontwheelfromyourbicycle.Place
the fender assembly onto the fork making sure the attachment
holesandfenderbracketholeslineup.Attachthefenderwith
the10mmhexboltandnut.Tightentheboltuntilsecure.

Ifyourbikeissuppliedwithawaterbottleandcage,attachthe
cagetothebicycleusingtheAllenboltsprovided.
Somebikescomeequippedwithasaddlebagorframebag.
The saddle bag installs under the seat with the zipper facing
therearwheel.Undothestrapsthatwraparoundthebag,
thread them through the rails underneath the seat and secure
around the bag. The smaller strap wraps around the seat
post.Framebagsinstallattheapexofthetopandseattubes.
Securethestrapsaroundeachtube.
The frame bag straps must not bind the cables. The
straps must go around the frame only.
SaddleBag
FrameBag
Reflector
Reflector
Reflector
Water bottle and cage